PIRETTI 2000 MANAGERIAL — Arm Height
The button to adjust arm height is located on the outside of the arm support.

Press the button to raise or lower the arm.

The arm height should be adjusted such that your shoulders are not “hunched”, but are relaxed.

PIRETTI 2000 MANAGERIAL — Arm Width
The “switch” to adjust arm width is located underneath the front of the armcap.

Push the switch to move the armcap in or out. Release the switch to lock the armcap in place.

PIRETTI 2000 MANAGERIAL — Back Height
(Depending on the model you have, this adjustment may or may not be available).

To adjust back height, grasp the lower edge of the back with both hands and raise the back to the desired position.

If you have gone too far, then raise the back to its highest point, and allow the back to drop to its lowest point.

Adjust back height such that the chair back follows the natural curve of your back.

PIRETTI 2000 MANAGERIAL — Backward Seat Tilt
The lever to eliminate backward tilt of the seat only is located at the right front. The back will still flex.

Pull the lever up to eliminate backward tilt of the seat only. Push the lever down to allow the seat to tilt backward normally.

PIRETTI 2000 MANAGERIAL — Seat Height
The lever to adjust seat height is located at the left front of the chair.

To lower seat height, raise the lever while you are seated in the chair.

To raise seat height, take your weight off of the seat and then raise the lever.

PIRETTI 2000 MANAGERIAL — Tilt Tension
The knob to change the tension of the seat is located underneath the chair.

Turn the dial counterclockwise to lower tension and clockwise to increase tension.