IMPRESS — Arm Height
To adjust arm height, pull up on the lever on the outside of the arm.

IMPRESS — Arm Width
To adjust arm width, push up on the small tab underneath the arm and move the arm inward or outward.

IMPRESS — Back Height
To adjust back height, grasp the lower edge of the back with both hands and raise the back to the desired position.

If you have gone too far, then raise the back to its highest point, and allow the back to drop to its lowest point.

Adjust back height such that the chair back follows the natural curve of the back.

IMPRESS — Back Lock
The lever to engage the back lock is located at the right rear of the seat.

There are there positions in which you can lock the back: upright - relaxed - very relaxed.

Once you are in the back position you prefer, push in the lever. The back will then lock in place an no longer flex.

To unlock the back, lean back slightly and then pull out the lever.

IMPRESS — Seat Depth
To adjust seat depth, raise the lever on the left front of the chair and move the seat forward or backward. Relese the lever to lock the seat in place.

IMPRESS — Seat Height
The lever to adjust seat height is located at the right front of the chair.

To lower seat height, raise the lever while you are seated in the chair.

To raise seat height, take your weight off of the seat and then raise the lever.

Your feet should be on the floor and your thighs parallel to the floor.

IMPRESS — Tilt Tension
An adjustment can be made to the chair’s seat tilt tension with the knob directly under the front of the seat.

To increase the tension of the tilt, turn the dial clockwise.

To decrease tension, turn the dial counterclockwise.